LP6000

[amccullers]

Has anybody ever seen or converted one of these to strobe? I have 8 strobes for an excal. but no bar, so I thought of doing it. I have enough clearance and can put both supplies under the speaker housing, the speaker is under hood on our tanker.


Any thoughts on this would be helpful.


Andrew

 

[ChargerLighting]

The power supplies should go under the dome; they're not waterproof. I'd set it up like a stock Excalibur w/the ps's between the 2 inboard strobes on each side. You might have to drill some holes but it can be done.


You may also need some kind of spacers or brackets to put the strobes up higher.

 

[amccullers]

Ok I will do that. I was thinking about my placement of the supplies after I posted and figured they wouldn't be water proof.

 

[RJ*]

I would put the PS's under the speaker housing, but get something to seal it up.

 

[ChargerLighting]

I would put the PS's under the speaker housing, but get something to seal it up.

Yeah you could do it that way too; as long as they're water tight, you'll be fine.