Mounting Whelen bar to '07-'10 tahoe/burb rack?

G1159

Member
Member
May 23, 2010
184
0
Southern New England
Has anyone mounted an LFL or 9m/Freedom to the luggage rack of a 07-10 tahoe or suburban?


It seems very possible to put long enough studs from the bottom of the rack upward into the feet and apply nuts. Anyone tried it and if so pictures?


Thanks.
 
I would contact a whelen dealer and see if they have made a kit for those vehicles for rack mounting, I know they make/made one for the explorers. Good luck-JOEYD
 
Hey i need some help, i am trying to pick between a 911ep lightbar and a Sho-me, has anyone had these brands before ?? sho-me looks like shit
 
Just get the strap kit and mount it to the roof. The 2 small holes are in the door jam which may be covered by the moulding when removed.


We have Tahoes with the 9m's on the luggage rack. It looks horrible and it is also tougher to find an automatic carwash to go through that has the clearance.
 
I have my Whelen 9622 mounted to my roof rack... The feet are on the roof and I had a spare set of straps that I cut to the length I needed... Then I drilled 2 holes per side and bolted it down, then used the long bolt that comes with the strap kits to hold it together. Here's what it looks like...


ai64.photobucket.com_albums_h191_tritontim47_Mobile_20Uploads_27a3fafc.jpg


ai64.photobucket.com_albums_h191_tritontim47_Mobile_20Uploads_8432bd54.jpg


ai64.photobucket.com_albums_h191_tritontim47_Mobile_20Uploads_2ede5394.jpg


It's been holding strong for over almost 2 years with no problems...
 
Not to bust anyones chops but seeing that last picture brings up a little pet peeve of mine. Please use stainless steel fasteners on your installs people. Nothing ruins an excellent install, then the nasty rust drip stains.


Just my 2 cents


Sal
 
blazinSS934 said:
Not to bust anyones chops but seeing that last picture brings up a little pet peeve of mine. Please use stainless steel fasteners on your installs people. Nothing ruins an excellent install, then the nasty rust drip stains.

Just my 2 cents


Sal

Yeah, I thought they were... But when I took those pics the other day I noticed it... They will be replaced this weekend... LoL
 
blazinSS934 said:
Not to bust anyones chops but seeing that last picture brings up a little pet peeve of mine. Please use stainless steel fasteners on your installs people. Nothing ruins an excellent install, then the nasty rust drip stains.

Just my 2 cents


Sal


I noticed that as well and I was going to say the same.
 
FYI:


Whelen's Ford Expedition (2003-2004) Roof Rack Mount Works with the 2007+ Tahoe/Burb/Avalanche Roof Racks. Not bad for quick disconnect with a wrench.


Not blessed by OEM, but just figured I'd share. Pics if anyone cares...

IMG00012-20090615-2115.jpg

IMG00012-20090615-2115.jpg
 

Forum Statistics

Threads
54,903
Messages
453,561
Members
19,592
Latest member
Fetcha28