ffjwhite said:
Well I have a FedSig Legend lightbar in all blue. I would like to add some red and amber to the bar. Now I know that the only way to do this is to replace a whole board. Now I am just wondering if it was possible to either order a board from FedSig or would it be possible to just get the LEDs and solder then on to the board. If I could solder then onto the board I am just wondering what style of LEDs they are. All help would be great. Thanks in advance.
You can easily order a board from
FS configured to your wishes. It'll cost you about $200-$250 per board.
I suppose you could try getting a board and soldering the LEDs. You might see if anyone on the board here has any ROC boards they would donate to your cause. There may be some non-functional ROC boards that have the LEDs you need. They are SMT LEDs so it's possible to solder them on yourself. I know I've had faulty ROC boards come back from the
FS service dep't with "reflowed solder on LEDs" on the repair ticket.
I hope that helps.