Takedown wiring for MX7000

John Smith

Junior Member
Hey guys,
So I'm totally confused.

I have a standard MX7000. Got the orange/black wire for the takedowns. Takedowns work properly.

However, that orange/black wire has continuity with ground. I was under the impression that should be a +12v for takedowns?

It goes to a fuse block in my trunk, and the fuse also shares continuity with ground.

What am I missing?
 

Pete L.

Site Veteran
Check your wires in the lightbar. MX wires had a tendency to get crispy. I think you
have a wire rubbing on the lightbar frame.
 

MtnMan

Senior Member
Sounds like you’re measuring continuity through the lamp filaments, which is completely normal.
 
OP
OP
J

John Smith

Junior Member
Thanks for the replies, the wires were good, bar functions normally.

I did still have the bulbs in, so that would've been my issue. Thanks!
 

Online statistics

Members online
18
Guests online
174
Total visitors
192

Staff online

Forum statistics

Threads
46,641
Messages
414,399
Unanswered questions
8
Members
16,880
Latest member
kiss.b.3
Top Bottom