DocMiller
Member
I received an edge 9000 from a friend, it was all red lens and in NJ I can only have blue as a firefighter. I tested the light when I first got it by powering up the red wire and grounding the black wire. All the strobes worked. I also grounded the white/black wire and connected switched power to the green wire for left alley, yellow wire for right alley and the red wire for the take downs, everything worked as they should........all I did was switch out the left alley socket because it looked nasty and replaced the red lens with blue, now only take down and alley lights work, no strobes will function, and I don't know where to start with testing the power supply as it is a sealed unit.
light bar in a 9006, serial# 212428. module is an SL6. light bar has 6 strobes and a director bar, although I wasn't going to worry about that part.
Any help would be greatly appreciated, I tried searching past forum posts but was unable to find anything matching my issue.
light bar in a 9006, serial# 212428. module is an SL6. light bar has 6 strobes and a director bar, although I wasn't going to worry about that part.
Any help would be greatly appreciated, I tried searching past forum posts but was unable to find anything matching my issue.
Attachments
Last edited by a moderator: