Shawn L
Member
RDT Car 25 said:I'm definitely interested in the Talons. I have a pair of sync Talons's that I could use changed to red. Any idea on a price for them?
Shawn L said:the pics I posted above are of a DPS depopulated head, they appear to have a coating, around the leds, ( it seems to be harder than silicone but it does have some squish to it.)
Mrlunchbox said:Can you do Federal Signal Cuda's by chance?
wilsonbr90 said:They look close but I'm not 100% unless you send me a picture of the board and diodes. I'm more than willing to try. So if your willing to post a picture I could give you a definate answer.
Brian
Mrlunchbox said:I don't have the Cuda yet but when I do I'll send it! Thank you!
wilsonbr90 said:Led conversion, population, and replacement of burnt out diodes!
No more replacing a head after a section Burns out and either throwing away or putting it in a box never to be used again.
Change rank, job, state? Need to change colors too? Can't stand that you bought all those lights and now you got to spend another fortune and make new holes.
Reuse the lights you already have! You know how many hours they have and what condition they are in.
Colors are: Amber, Red, Blue, Green, Purple, White.
There is also a few special order colors non-warning specific. Pink for the ladies
Many many brands/ manufactures use the same platform of LED's and I'm constantly finding new lights.
Whelen LED are guaranteed possible.
Many cheap China brand lights I can bring up the output of.
Pricelist for whelen lights
First off, Burnt out diode/section- $2 a module + $2 a diode
Avenger/ Dominators/ Talons with linear heads- $10 a module changed.
--500 series--
*depopulated lin6: must confirm they are star based Led's first. Ask me for more info*
TIR3/ CON3- $6
Lin4/ TIR4- $6
Lin6/ TIR6/ Linz6- $10
Lin8- $13
Linear corner- $16
Extended linear corner- $20
--400 series--
400 linear 6 over 6- $12 per line
400 linear 6 over 3- $12 for the 6, $7. For the 3.
400 corner module- standard- $14 per line
400 extended corner module- $20 per line
--600 series--
600 super-led- $12
--700 series--
700 super-led- $12
--900 series--
900 series super-led- $25
--MISC--
SPECTIR8-$12
Populating- $5 a line w/ same color
911ep 3 diode modules- tbd
as you see there are many possibilities.
Many people ask me what diodes I am using. I cannot say other than they come from a name brand warning light manufacturer near me.
I did a side by side test with a whelen tir6b(blue)
I changed the leds out in 1 module with new blue ones. The second module I left it whelen.
Results: color to the eyes was identical. The light output on the one I changed was actually 20-50lux brighter than the whelen's.
I personally use lights I changed on my pov
Split colors are capable in a single head also.
Red/amber and Blue/ white Tir6 with a clear non-optic lens does not get split fail at a distance.
Feel free to ask any question.
Payment will be PayPal. Shipping is determined by you. However you ship it to me is how you will receive it in return and whatever you pay for shipping is what the shipping fee will be.
Also I've received lots of pm's but not a lot of product. Is there something specific people want to see me do? Send me a request and ill get it up!
Ill guarantee the heads. If they fail ill replace it if its my fault.
Brian
Lin6 amber before
Lin6 split blue/amber
Whelen 700series amber before
Whelen 700series full conversion to blue
Note 700series super led use 6 diagnostic less that cannot be converted. But the output is minimal and gets washed out
wilsonbr90 said:UPDATE: 400's are on for color changes. I cannot populate. The circuitry is there, not the components. I will color change any 400 style light and corner modules. This includes freedom corners.
Retired1 said:Does this mean that my 6 over 3 400s can have the colors changed, but not converted to 6 over 6 during the color change process?
rwo978 said:Finally got a box sent. PM sent with instructions. Also put a sheet in the box.
Yes, I sent 6 blue (I have an over abundance of blue) to change to amber. If you still want to do as we pm'd about to keep them factory, just let me know. Chief1565 left feedback today for our card swap.Mrlunchbox said:Ryan,
you didn't send along a solaris module to him by chance at all?