JohnFireFan
Member
I am using two Feniex Cannons in dual color red/white as rear hatch lights in a Ford Explorer. After test running the Feniex Cannons as solid colors for around 5-10 minutes the light go so hot that it burnt out some of the LEDs or something along those lines. I turned on the lights and let it sit for 5-10 minutes on solid white. Next thing I new the LEDs started blinking and would not stay solid. I quickly turned them off and let them cool down. I turned them on again this morning and now they work BUT one Feniex Cannons white LEDs are only working to half capacity/brightness. The red LEDs are at full brightness it is only the white LEDs in one Feniex Cannon that is not at full brightness. Anyone had previous experiences with this? I guess I should contact Feniex and get it fixed or replaced?