Please and thank you in advance. So I've been building up and mx7000 for a month or so now (I haven't been posting here in a while ) So basically the long and short of it is, is I have a light out on my arrowstik. Now I know before you say change the bulb, let me explain. When we had the bar completely torn apart, everything worked. Now that we are hours from the install, the second in from the right, (if you're looking from the rear) doesn't work now. When it is out of where it's screwee in, it works, is super bright and the end one does not work. Vise versa when it's installed, the outside one works fine but this doesnt. There is a steady burn led on the controller in the same position as that light. Is it something I'm missing, or is there something bigger I'm not noticing. Pictures to come if you can't tell what I'm talking about.