Plugging HAW holes

billyfromhill

Registered Member
What's the best way to plug the factory Ford Police Interceptor Utility twist-lock holes in the tail lights? I had to replace a tail light on my 2014 vehicle and the new one has the twist lock hole. The vehicle does not have HAWs. I originally was thinking that I could get another socket for the reverse/turn signal lights but the HAW twist-lock holes are larger than the reverse and turn sockets.
 

Evtech161

Established Member
I have used duct seal.... its a gray putty like substance used in the electrical industry that will seal the hole. the other option is weather tape. but the duct seal is a lot easier to find and costs about 2 bucks a brick at home depot or lowes
 
OP
OP
B

billyfromhill

Registered Member
Problem solved. I have a buddy who is going to take some measurements and 3D print me a plug to fit the twist-lock hole
 
I work at a upfitter and have a box of the original twist lock plugs for the HAWs. If you give me and address I can send you a couple
 

Online statistics

Members online
12
Guests online
123
Total visitors
135

Forum statistics

Threads
46,599
Messages
414,233
Unanswered questions
8
Members
16,869
Latest member
boxburn
Top Bottom