Search results

Need help finding this I/O board. I believe it's from from a single color liberty 2. But I can't seem to find the part number when I search it or when I check ebay for replacement. Any leads or help would be great, thanks!

I got a CDM 1550 and none of the backlights don't work. Any idea where to get started to see wby they don't work?

Feniex has updated their Cannon Hideaway from 2209 V2 to 2219 V3. Removed is the inline flasher and replaced with all the components stuffed into the head of the hideaway! No more inline driver to worry about now!! Also updated is the flash patterns. They've added Attack 1 and Attack 2 from...

So, I'm reading that the Touchmaster Delta is capable of 200W. The manual doesn't really specify how to achieve this. But, I'm assuming just connect 2 100W speakers instead of 1 and it automatically adjusts. Similar to how the CenCom does 200W? If anyone can confirm please. Thanks!

Just curious, if i change the polarity on the motor for a rotator (Whelen RB6) will that reverse the direction the motor spins? Thanks!

Any idea what these lights are? I can't seem to find any info on them. We have red and blues on our new to us ambulance. Thanks!

We have a new to us ambulance that is running a SVP SS741-MG Siren 200W. Problem is, it doesn't work. It keeps blowing the #2 fuse and I can't get any tones working and can't hear them coming from the box either. I've looked at it and can't figure out what's going on. All the components on...

Looking for 1 or 2 Blue Lenses for a Whelen RB6 Rotator. I've currently got red lenses, but I can't run red. Thanks!

My FD replaced our Whelen Inner Edge XLP with a full sized bar for our Ford PIU and want to sell this bar to offset the cost of the full sized bar. Trying to get $400.00 shipped. Thanks for looking! Setup as Follows: R/W/R/W/R/TD / TD/R/W/R/W/R 9/14 Manufacture Date Minimal trimming on...

Anybody know if you can order the PIU OEM rear wire conduit from Ford? Or know the part number? I've been trying to find it with no luck. Thanks!

I'm trying to run wiring through the front doors of a 15 Ford PIU. There's really no good way to make it from the door to the body. The wire boot has a connector at the body and I'm unable to get past that. I've looked around and haven't been able to find the answer. So, how does everyone run...

Just wondering what you are all doing installing cannons or other non-stock LAWS in the PIU headlights that have the twist locks in them. I thought there was enough room to screw them down, but I'm finding that's not the case. Thanks!

I'll be upfitting a 2015 Ford PIU shortly and will be putting a full size bar on it. My question is, how is everyone hooking up power for those bars? I've seen many upfitters run the power for those from the rear power takeoff. I know the rear power takeoff is 80 amps. I know many bars call...

Thinking of getting Fusion 180 in Amber and mounting them on my tow mirrors as a running/turn signal light (since GM decided not to put them on). I know I need diodes and resistors to get it to function properly. What I need to know is, will the regular fusion run properly being dimmed and...

I'm going to be ordering a 49" Fusion single color for my FD (along with many other Feniex items) for a build on our new-to-us 2015 Interceptor Utility Chief's buggy. As I'm planning my layout, I noticed that the 49" Fusion states it only draws 15 amps. In the Feniex manual, they call for a 40...

My department just purchased a used 2015 Interceptor Utility for use as a chiefs buggy. In it is a 3M SupeRex 3 ALPR Processor with GPS and all the cables, sans camera's or software. We obviously don't need to be reading plates responding to fires, so we need to get rid of this. Depending on...

So, Feniex is releasing tidbits of products for 2017. First the showed a picture or a "Rumbler" type speaker. No specific details yet. The next is 2 new siren controllers. Both Adapt the 4200 mini controller into it. The first is a rotary switch siren that will allow up to 22 tones to be...

Looks like we'll finally get our wish on the data links. Will be compatible with 49" and 60" lightbars and Storm Pro 100W and 200W. Sill has the 8 programmable inputs, but the actual number of terminals is down to 20. The other side is has 3 RJ-45 ports for linking to lightbar/siren and 1 for...

Easy communication, great price, packaged well, radio works great! Thanks!!

Anybody have an idea when the com ports will start being used for the lightbars and the storm pro's? I though I saw somewhere the lightbar was going to get the cable this quarter or next. I haven't heard anything for the storm pro though. This would be a nice feature to activate. Also, if...

So, I got my first big build for somebody other than my fire dept. This is for a large subdivision security department that is part of 2 counties. This vehicle is used for patrol. I guess you could say, are a pseudo police department, enforcing subdivision rules, speed limits, etc and...

Hey all, so I'm in the middle of my first major upfit and I swear I'm gonna go grey or lose my hair! I keep running into unforseen issues left and right... But I have a few questions and I'll probably have more later. 1.) I have the stand alone rear quarter glass Whelen Ions. So there's not...

Hey all, So I'm starting an 2016 Interceptro Utility Build and have a few questions. Is Ford supposed to supply all the pigtail connectors for all the options that came with the vehicle? I only have the pigtails for the 3 circuit power/ground and the 14 way front power/vehicle signal. I have...

Saw this little guy on the Strobes N More youtube. Looks pretty fun and the price isn't bad either. $129 w/ permanent mount or add $15 for a magnetic mount. Much better than the $500-ish for the Whelen Rota-Beam.

I know the answer to this, but I'm just looking for justification to spend the money and energy to rewire again, lol. On the side of the brush guard, I had a T3 and Apollo alternating. I took the T3 off and now I'm thinking of adding another 2 Apollo's to stack on the sides now. Bigger...

I'm trying to find the part number for the drivers side speaker mount shown in the beginning of this video. I'm assuming it's a Whelen part. I know the passenger side for Whelen is SAK24, but can't find anything about the drivers side. I'm looking to set up a dual siren on a Tahoe later and was...

Bought a Jotto Desk console for my silverado. Item arrived quickly, well packaged and works great. Smooth and easy transaction and great communication! Thanks!

Just got the storm pro 200 in for a build and was testing it. All of the aux tones work, but none of the actual warning tones work. I can hear the processor playing the tones, but nothing comes out of the speak. Any clues?

I have a 2016 Interceptor bid coming up and need to know before bidding. Does anyone know if the Feniex Apollos will fit horizontally in the fog light location: I know it'll be tight, but I'm looking for wide there cause there will be no push bumper or mirror lights. There will maybe a...

So, I was trying to change the pattern on the Apollo's on my brush guard and one won't change. All the others will, but one just stays on the same pattern. All the sync wires are connected and they're staying in sync, but for some reason one just doesn't do anything. All thr other wires are...