Zapp Brannigan
Lifetime VIP Donor
*UPDATE 6-8-14 Completely Stripped* B&B Lighting Solutions - 2003 Chevy Avalanche
- Thread starter TritonBoulder47
- Start date
TritonBoulder47
Member
Nah. It would be a Frankenbar if it was a Liberty with, say, normal Libby corners, a single regular 500 linear-LED and a Code 3 LED-X in front, plus a couple Chinese TIR3's, and a FedSig halogen traffic advisor bolted to the back, with a Sentry and a SuperStrobe stuck on top. And of course the Titan underneath.
This is just a custom Liberty. 1) it's symmetrical, 2) it's all LED, 3) only one external attachment. A Frankenbar is none of these.
This is just a custom Liberty. 1) it's symmetrical, 2) it's all LED, 3) only one external attachment. A Frankenbar is none of these.
TritonBoulder47
Member
Made a little more progress on the rebuild... I got the switchbox mounted in its new home and its all wired up...
Underside: Terminal strips are tones easier to use instead of butt connecting every wire... Not sure why it took me so long to start using them... lol
All mounted up: I also got my Radio mounted in its new home as well, but I didn't get to wiring it yet...
The Switchbox is set-up as follows:
Switch #1 - Front LEDs (Mirror Beams, 700s, 600s, and Intersection LIN4s)
Switch #2 - Rear LEDs (Amber SNM E3s, Blue SNM E3s, Rear Intersection LIN3s)
Switch #3 - Take Downs (SXTDLEDs and Feniex Titan 1000)
Switch #4 - Left Alley (future addition, possibly a Feniex Titan 200)
Switch #5 - Right Alley (future addition, possibly a Feniex Titan 200)
Switch #6 - Flashing Take Downs (Flashed the SXTDLEDs against the Feniex Titan 1000)
The Pursuit Switch is set-up as follows:
Position #1 - All 4 Corners plus the Rear Amber (CON-3) Flashers
Position #2 - Adds the rest of the Rear (4 TIR-6s), and the Front LIN-6s
Position #3 - Adds the Front Steady CON-3, T-4s and Fairys
My T/A control and Siren will be mounted in the Center Console under the lid, Here it is mocked-up:
Underside: Terminal strips are tones easier to use instead of butt connecting every wire... Not sure why it took me so long to start using them... lol
All mounted up: I also got my Radio mounted in its new home as well, but I didn't get to wiring it yet...
The Switchbox is set-up as follows:
Switch #1 - Front LEDs (Mirror Beams, 700s, 600s, and Intersection LIN4s)
Switch #2 - Rear LEDs (Amber SNM E3s, Blue SNM E3s, Rear Intersection LIN3s)
Switch #3 - Take Downs (SXTDLEDs and Feniex Titan 1000)
Switch #4 - Left Alley (future addition, possibly a Feniex Titan 200)
Switch #5 - Right Alley (future addition, possibly a Feniex Titan 200)
Switch #6 - Flashing Take Downs (Flashed the SXTDLEDs against the Feniex Titan 1000)
The Pursuit Switch is set-up as follows:
Position #1 - All 4 Corners plus the Rear Amber (CON-3) Flashers
Position #2 - Adds the rest of the Rear (4 TIR-6s), and the Front LIN-6s
Position #3 - Adds the Front Steady CON-3, T-4s and Fairys
My T/A control and Siren will be mounted in the Center Console under the lid, Here it is mocked-up:
Carlos SpicyWeiner
Lifetime VIP Donor
TritonBoulder47
Member
acala91 said:
FEVER said:He has a he has a 4200 coming as well as more titans
acala91 said:
The 4200 is only going to replace the Galls XL400 and the Whelen LED T/A Control though... lol
TritonBoulder47
Member
I got a little bit more done today... If it wasn't so hot I would have dome some lighting stuff, BUt I did get my mobile radio hooked up and my Sirius Satellite radio run...
Hopefully later this week I'll get some lighting done...
Hopefully later this week I'll get some lighting done...
proudfirefighter
Member
TritonBoulder47
Member
proudfirefighter said:I'm still waiting on the update on lighting! so hurry up!
As am I... lol
TritonBoulder47
Member
I'm still waiting on some supplies to come in the mail so I can get my Grill Lights, MirrorBeams, and rear E3s hooked up... But I decided to play around with my No-Splice HLF and I decided to install that for sh*ts and giggles... lol
Here's a quick vid...
Here's a quick vid...
TritonBoulder47
Member
Storm4200 said:
Not without the supplies I ordered last week that should have been here by last weekend... LoL Soon my friend, soon... Supplies are getting delivered tomorrow...
Can you post up a photo of how you mounted the 600 series to the grill? I'm about to do the same with my 06 Silverado and could use some ideas.
TritonBoulder47
Member
It's a ruse. Boulder actually just bought clear 600 and 700 lenses and mounted them to the grill to try to impress us... :weird:
TritonBoulder47
Member
TritonBoulder47
Member
Ok ladies and gentlemen (especially foxtrot5 and Storm4200) The long awaited activation of my frontal warning...
MirrorBeams, 700s, and 600s all running off my ULF-44. Plus I threw my HLF in for sh*ts and giggles... lol
Day Vid: (the angle of my driveway and the angle of the 700s makes it appear as if they are dim/not working... I assure you they are.)
MirrorBeams, 700s, and 600s all running off my ULF-44. Plus I threw my HLF in for sh*ts and giggles... lol
Day Vid: (the angle of my driveway and the angle of the 700s makes it appear as if they are dim/not working... I assure you they are.)
TritonBoulder47
Member
TritonBoulder47
Member
foxtrot5 said:
They've always worked, just havent been hooked up since I started my re-wire... lol
paff2
Member
TritonBoulder47
Member
ch31391 said:
Again, the SNM E3s in the rear DO WORK, they are just not currently hooked up... I still have a pair of Whelen LIN-3s to mount in the rear for Rear/Side warning and then I'll get everything hooked up... I also have a pair of Whelen LIN-4s and a pair of SNM E3s to still mount somewhere... one of those pairs will be Front/Intersection warning not sure what I'll do with the other pair... lol
Plus I have some Feniex Titan heads to mount in the rear as well... lol Maybe later this week if I get time...
ch31391 said:
My favorite pattern, Action Flash...
sync looks great! TBO, i think you should sell all four of those grill lights and buy a pair of M7s. call it a day. i think the grill looks too crowded when theyre off. when theyre on, the sync makes them looks great.
its coming along nicely. its my favorite Liberty that ive seen. i would like to see the rear ambers flash even slower. they make such a huge difference.
its coming along nicely. its my favorite Liberty that ive seen. i would like to see the rear ambers flash even slower. they make such a huge difference.
TritonBoulder47
Member
Storm4200 said:
To me the M7s are too "rounded" for my body style truck... Besides, Even if I sold the 700s and 600s I still wouldn't have the funds for 1 pair of M7s... lol The grill does look crazy obnoxious... lol I've been thinking about mounting them behind the grill again, but then I'd lose the off-axis ability of the lightheads... I dunno though, I'm always thinking of ways to change up my set-up... lol
Storm4200 said:
I completely agree... Thats the slowest flash pattern on the I/O Board, other than Steady... lol But 2 of the SNM E3s between the bumper and tailgate are amber and they will be on a slow as possible flash pattern... Then I still have my Custom CON-3 T/A that still need to me mounted in my back window... lol
TritonBoulder47
Member
JohnFireFan said:
Do you mean the amber lights next to my Fog Lights...? No, they are my DRLs... I switched them from the stock "white" bulb to amber ones... Its an Avalanche thing from another forum...
Thanks
TritonBoulder47
Member
Oh that's right. I forgot about that stick. That's gonna look great.
Btw, the M7s are no way too rounded. They'd look great!! If you do decide to mount the ones you have behind the grill, didn't you say you had a pair of LIN somethings for the front intersection? If so, I would worry too much about loosing the off-axis by hiding them behind the grill.
Btw, the M7s are no way too rounded. They'd look great!! If you do decide to mount the ones you have behind the grill, didn't you say you had a pair of LIN somethings for the front intersection? If so, I would worry too much about loosing the off-axis by hiding them behind the grill.
TritonBoulder47
Member
Storm4200 said:
Yeah, I'm still deciding what to do with all the lights I have... lol here's what I have just sitting around
3 Whelen LIN-4s - Blue
2 Whelen LIN-3 - Blue
2 SNM E3s on a SNM Intersection Bracket
2 Feniex Titan Flood T-100s (Probably going to be used as Alley lights, but I want to get a pair of Feniex Titan X-200s for that)
2 Feniex Titan Flood Modules on a Feniex LP Bracket
2 Feniex Titan Flood Modules
SNM Intersection Bracket & E3s
Feniex LP Bracket & Titans
I'm just waiting for the Bull Bar I want to come back in stock, then I can mount the SMN bracket to it and maybe get a custom front plate made... lol The Feniex Bracket w/ Titans will go out back and hooked up to my reverse lights... And depending if I need more light, I'll mount the other 2 Titan Modules between my bumper and tailgate in between the E3s out back... But that may change too...
calebsheltonmed23
Member
TritonBoulder47 said:Yeah, I'm still deciding what to do with all the lights I have... lol here's what I have just sitting around
3 Whelen LIN-4s - Blue
2 Whelen LIN-3 - Blue
2 SNM E3s on a SNM Intersection Bracket
2 Feniex Titan Flood T-100s (Probably going to be used as Alley lights, but I want to get a pair of Feniex Titan X-200s for that)
2 Feniex Titan Flood Modules on a Feniex LP Bracket
2 Feniex Titan Flood Modules
SNM Intersection Bracket & E3s
Feniex LP Bracket & Titans
I'm just waiting for the Bull Bar I want to come back in stock, then I can mount the SMN bracket to it and maybe get a custom front plate made... lol The Feniex Bracket w/ Titans will go out back and hooked up to my reverse lights... And depending if I need more light, I'll mount the other 2 Titan Modules between my bumper and tailgate in between the E3s out back... But that may change too...
Jesus man!! If I had your money I'd burn mine!! lol. The truck looks awesome!
Sparky_911
Supporting Donor
Awesome rig man. If someone doesn't see you coming or going they need to get retested at the DMV. I also happened to notice in your last pic post...is that a Watson Dispatch Console I see in the background??
TritonBoulder47
Member
Sparky_911
Supporting Donor
TritonBoulder47 said:
Nice to know that our dispatch center isn't the only one with folks who do that.
calebsheltonmed23
Member