Search results

https://dam-storage.s3.us-east-2.amazonaws.com/ETHIFP0_IS.pdf

Its been a while, but i believe this is how it works. At passenger headlight, green/black wire to headlight gets cut. Yellow goes to passenger headlight Blue goes to other end of cut (driver's headlight) Red or orange to switch White to battery Green to ground Black or brown is the nighttime...

IIRC it gets installed on passenger side cutting into the LG/BK high beam wire

Does anyone know if they can be used or have be used for the park/turn on a newer (2019) Dodge Durango with success?

Have NIB micropulse 600 and 600 ultra in blue or NIB 600 ultra in amber or used but very good condition red. Other light heads as well if someone is looking for other particular light heads.

Looks like one switch would allow power to the fuse block, then to the individual pots then to the lights. looks like it is "all on" or "all off" with one switch and no controller.

No markings at all

Sorry, but I pulled the board from a working bar just for the photos. The chip is completely unmarked, so someone else with more knowledge about smd chips would have to chime in.

surface mount ceramic capacitor?

I just did one on a 2019 Dodge Durango Pursiuit and had the exact same issue. Luckily I have experience in fabrication and was able to reconfigure the bends in the provided brackets. The bar is now tight to the headliner and windshield with all the provided gaskets and brackets. I spent over an...

Any updates?

So the answer is yes as described above. The three wire modules I have work fine with a separate positive flasher. I'm going to use a ULF-44 to get the patterns and sync that I want.

Specifically I was told that the Fusion dummy heads can be controlled by; Constant +12V to red wire Constant ground to black wire +12V to trigger wire for steady, or pulse +12V for flashing at pulse rate Do I understand this correctly?

Can a different flasher be swapped into an Fusion ILB so it can be sync'd with other lights?

Where did you mount your flasher, and where did you tap into the rear harness? If you don't mind.

PM sent

Any pics of visor bar and mounts?

I have a Sound Off Pinnacle 8 head that is all blue for the CV rear deck. let me know if your interested.

Hi Guys, I am changing out vehicles soon. I'm moving from 2011 Crown Victoria Interceptor to 2019 Dodge Durango Pursuit. I have a front Sound Off Signal Pinnacle (EPL 8000) that I'd love to move to the Durango. I know I would need new shrouds and brackets but don't know where to source them...

If you get any info on flashing the rear lights, or front lights for that matter please post. I'm interested in any info.

May I ask, where are you tapping into constant power and Ignition only power?

NP, glad you got it done.

I have 2 Whelen UPS-64LX. Each has 4 outlets. I will donate if you want to pay shipping.

Install took all of about 10 mins when replacing whelen amp. Hooked up the positive and negative wires. Then the speaker wires and RJ-45 cable. Reprogrammed the controller to use the StormPro siren and everything was done. The sound is crisp and just as loud as the whelen amp that came out.

Thank you sir

I'm sure this is a JV question but, I have a 4200DL controller and want to add a stormpro 100, is this accomplished with the RJ45 Jack and programming of the controller or do I need to program the tones on the 100 and then hook each input to an output on the relay panel? Any input is...

Reduced to $55 each

These are New in Box, real, Federal Signal sync version Viper S2 Dual Visor Lights in Blue/Blue configuration. They are unused and were going to be installed but never made it. You are purchasing one dual light at this price. Shipping included CONUS.