Search results

Mars/Tri Lite used to offer two bulbs for their Mars 888 lights. One was a 60,000CP bulb part no. 426006 and the other one a 100,000CP bulb part no. 426007. They no longer offer the higher powered bulb. Does anyone know why this is? Also does anyone have a bulb number for the brighter bulb...

Used Federal Signal Touchmaster Siren. Bench tested and working condition. $75 shipped.

Looking for the above dome in clear. Let me know if you have one to offer or see one posted anywhere.

Looking for some help with dual color light programming. Im using the cencom carbide with dual color ions and a dual color liberty. I'm not a fan of the no off time between switching colors. For example the off time on a single color light is filled with the flash of the other color. Are...

I installed a set of Whelen Par 28 lights with the white steady to replace fog lights on a 2013 Charger. When the driving mode (white) is activated, they start to flicker after about a second of being on. I am using the factory harness for driving mode/ground, then another trigger for the...

Looking for a pair of 2011-2014 Dodge Charger brackets for the Whelen Par 28 lights. Whelen part number P28DC11.

Anyone know the part number or what these switches are called. They are carling switches, just not sure what the exact model is. I tried using the part numbers on the back of the switch but I can't find online. Thanks.

Anyone have any experience finding or using a photocell to control the hi/low option on LED lights? I have to upgrade the lighting some fire apparatus, and would much rather use a photocell than a switch, simply because nobody will ever use the switch. I saw that Whelen had possibly made one...

Anyone ever use one of these brackets for the cobra dash lights? How is it intended to mount to the headliner? Any pictures of one installed with this bracket would be helpful.

Need some havis plates for a sw300 switch box, kenwood 7150 radio, internal cup holders, let me know what you have.  

Anyone know what each pod in a smart vector draws?  Trying to figure out the load on the bar, but the installation manual does not mention anything on the draw, only what the functions are.  The bar has 3 fast rotators and 2 slow on the same wire, then the 2 smart pods are on another wire with...

Need the mount for a federal signal vector lightbar (full size). 

As much as I love the brightness of the cannon, I recently removed a cannon from service which totaled about 4 months.  (Someone bought a new vehicle shortly after install.)  What I found somewhat worried me, that only a few months of being exposed to the elements, the cannon rear aluminum was...

Background:  Hopefully this will save you headaches from tearing your wire apart to find out why you have a Feniex Cannon not working.  After my install, I found that I had one cannon that was not working at all.  This will also save you time from having to tear your install apart and sending...

I will let the pics do the talking...

In the final stages of the specs for our new rescue pumper. All of the body lights are M6s and M9s, for a total of about 16-20 lights all together. The question here is that what should be done to sync these lights together? Would the sync wire be able to sync all of them together or is it...

Here is an install I did for my fire company on our boat (I know its not much of a boat, but it is what it is, and serves its purpose well). We have a few large fishing lakes in our area as well as a creek which leads to the Deleware Bay. The creek is 9 miles long, and has many fingers and...

Advanced Warning Lights Pulse Two LED Dash Light Model Number: Pulse2 List Price: $99.99 Link: AWL Pulse Two Dash Light I bought this light because AWL stopped carrying the other dash lights. I usually use this brand for my POV installs because they are generally cheap, durable, and...

Im trying to figure out a way to mount a beacon onto a small aluminum rescue boat. I was thinking of putting it on just a standard 1" pipe for the extra height, but would like some kind of way of putting it down when not in use. A telescoping mount would work as well, just looking for some...

I installed a sound off solid state headlight flasher on a 2011 Jeep Wrangler. This is not the first one I have installed, but this one only flashes the passenger side headlight. Both high beams still work. I followed the instructions like any other time and cut the wire on the passenger side...

I have a whelen liberty bar to put on a new ford interceptor. The last car had a liberty that came off a durango, so it already had the leveling part on it. This one came off of an old crown vic, and the interceptor has a curved roof. What part do I need to get the lightbar level? I am...

Am I missing something here, or am I right? After much confusion with the law, and people saying that the lights are useless, I have done some researching, and here is what I have found. I did not put this in another section because I do not think it applies, since it is questioning a specific...

Our engine has a 72 inch freedom with corners, 2 red and two white led heads to the front. The mfg date is 11/05. It is time to add some more modules to this bar, are these prewired internally or will it be complicated to add two pairs of lights to this bar? Either way it will be done...

Anyone here know what is needed to make the takedown and alley lights flash for a Whelen Patriot. I cant find anything online or in the manual other than to connect the +to the white/yellow or white/green wire. When I was adding new led lights to the open slots, I noticed that the wires were...

I recently removed a carson 100 watt compact speaker, which I do not believe has any drain holes. The output was greatly reduced, and thought it was time for an upgrade. When I removed it, water poured out of it, Im assuming because it was tilted slightly upward (due to the design of the...

I upgraded the lighting package on our fire utility truck today. I swapped the lenses in the lightbar and made it red/blue instead of all red. Added 6 Soundoff LED3s to the side and front grill. They are hooked to a progressive slide switch that also changes the lightbar pattern. In position...

Hi, Im am trying to configure a whelen liberty with the gen2 18 pin connector. Just had a question. Can you run power to more than one pin at a time? For example, could you have pin 1 do the corners, and pin 2 do the inner modules, and turn them on at the same time? The reason I ask this is...

Well I just pulled the intersector off of my mirror for an inspection, and this is what I found The white wire is cut coming out of the light head. Not sure what happened to it. The question is, what is this for, it doesnt really make sense to have four wires going to the flasher. It...

I have a 4 outlet strobe power supply for a mini bar that Im trying to get to flash only 3 strobes at a time. It seems like it will only do 2 or 4, not 3 heads. I saw on the old board I believe that there is a way to splice the wire so it flashes for both outlets 1+2 instead of just outlet 1...

Anyone have a diagram for the sound off q-switch head light flasher with the MNSTAR harness? I just picked one of these up, and cant find a diagram online. The model number is ETQSSSTX. I tried to call them, but they are closed today.